Sponsorship

The LMS-Patriot Project is seeking sponsorship of components to help build 'The Unknown Warrior'. To date, many components have already been sponsored, which have contributed to the rapid progress of the new Patriot - 'The Unknown Warrior'. The sponsors are listed on the Roll of Honour page, to acknowledge their generous contribution to the Project.

If you would like to sponsor any of the following components, please contact us.

Available for sponsorship:

Boiler

  • Dome - Pattern £2,500 (No longer available)
  • Dome - Casting £1,100 (No longer available)
  • Dome - Machining £1,880 (No longer available)
  • Palm Stay Pattern £1,000 (No longer available)
  • Palm Stays £165 each (No longer available)
  • Palm Stays - Casting £100 (6 available)
  • Palm Stays - Machining £500 (4 required)
  • Rivet £5 each (thousands required)
  • Bolt £1 (Many required)
  • Superheater - Pattern £2,500 (1 required)
  • Superheater - Casting £2,000 (1 required)
  • Superheater - Machining £2,000 (1 required)
  • 324 Crown Stays £50 each (260 available)
  • Internal Pipe Runs £150 each (6 required)
  • Internal Pipework Support £600 (1 required)
  • 12 Longitudinal Stays £400 each (11 available)
  • Main Steam Pipe £3,000 (1 required)
  • Safety Valves £5,000 (2 required)
  • Transverse Stays £300 each (30 required)
  • 2 Fusible Plugs plus 2 spares £50 each (All now sponsored)
  • 400 Stay copper £20 each (All now sponsored)
  • 971 Stay steel £7 each (418 available)
  • Outside steam pipe casting £288 each (No longer available)


Wheels/Motion

  • 1 crank axle at £10,000
  • 2 webs for crank axle at £1,750 each (none available)
  • 6 tyres at £3,500 each (4 still available)
  • 2 plain axles at £2000 each (1 still available)
  • 1 axle box pattern at £1,250
  • 8 loco coupled axle springs £800 each
  • 6 crank pins at £750 each (4 still available)
  • 6 loco axle box castings £625 each (5 still available)
  • 1 con rod forging £3800
  • 1 con rod machining £5600
  • 6 Valve end covers  £400 each (4 still available)
  • Big end strap forging £2154
  • 2 Inside big end bearing half casting £810 each
  • 1 inside valve gear eccentric casting £280 each(now Sponsored)
  • 3 Piston rod casting complete with piston rings £3702 each
  • 3 Piston valve rod complete with piston rings £4638 each
  • 3 Reverser shaft trunnion casting £500 each (2 available)
  • 3 Piston valve rod complete with piston rings £4638 each
  • 3 Reverser shaft trunnion Bearings £380 each(2 available)
  • 3 Pistons £320 each (All now sponsored))
  • 2 Machine Eccentric Halves £775 each
  • Six-feed atomiser complete with non return valves and adaptors £1450
  • Eccentric halves £165 each (All now sponsored)
  • Eccentric halves - Machining £775 each (2 available)
  • 2 Valve Crosshead bracket £260 each (All now sponsored)
  • 2 Valve Crosshead Bracket Castings £400 (All now sponsored)
  • 6 Slidebars £1,200 each (2 still available)
  • Eccentric sheave assembly £1588
  • 2 Outside big end bearing £510 (both now sponsored)
  • Inside Crosshead Bracket Casting (now sponsored)
  • Expansion Links £2,350 each (6 required)
  • Reverser Wheel Casting. (now sponsored)

Frames

  • 4 loco horn guide patterns £300 each (Only one still available)
  • 12 horn guides for driving wheels £250 each (All now Sponsored)
  • 12 spring hanger castings £200 each (All now Sponsored)
  • Stretcher 1 Pattern £200 (now sponsored)
  • Stretcher 1 Casting £795 (now sponsored)
  • Stretcher 2 Pattern £650
  • Stretcher 2 Casting £1375
  • Stretcher 3 Pattern £395
  • Stretcher 3 Casting £637
  • Stretcher 4 Pattern £480 (Now sponsored)
  • Stretcher 4 Casting £2100
  • 8 Reverser shaft trunnion bearing casting £380 each
  • 2 Sandbox necks £1000 each (both now sponsored)
  • 2 Rear Sandboxes (both now sponsored)

Brake Gear

  • 6 Brake hangers £354 each (all now sponsored)
  • 3 Crossbeam £258 each (0 available)
  • 2 Crossbeam Bridle £225 each (now sponsored)
  • 43 Fittings £70 each (31 still available)
  • 4 Pull rod £250 each (all now sponsored)
  • 6 Machine brake hangers £116 each (All now sponsored)
  • 2 Outside crosshead bracket casting £1270 each

Bogie

  • 2 Polystyrene patterns for the 2 bogie wheels £915 each
  • 2 Steel castings for the 2 bogie wheels £1,885 each
  • 4 Equalising beams £1500 each
  • 2 Leaf springs  £1000 each (1 still available)
  • Bogie centre casting £3000 and £3000 machining
  • 1 Frame plates  £800 each
  • 1 Bogie check spring stays £130 each
  • 2 Bogie frame stays £575 each (2 available)
  • 2 Tyres   £1200 each
  • Axle X 1  £1,450
  • Machine axle  £500 (Now sponsored)
  • 2 Machine bogie wheels  £360 each
  • 2 Push wheel centres onto axles  £540 each
  • 2 Machine wheel centres round/true  £380 each
  • 2 Machine bore of tyres Gibson fitting  £590 each
  • 2 Supply Gibson rings £320 each (Both sponsored)
  • 2 Bogie axlebox casting £1560 each (1 available)
  • Bogie axle box Pattern £200 (now sponsored)

Cylinder 

  • Rear cylinder covers polystyrene patterns £525 each (all now sponsored)
  • 3 Cylinder cover castings rear £800 each (2 remaining)
  • 1 Cylinder cover castings front  £480 each (all now sponsored)
  • 2 Cylinder cover pattern front  £420 each (all now sponsored)
  • 2 Machining outside cylinders  £5000 each
  • 62 Fitted Bolts for cylinders  £100 each (59 available)
  • 3 Front Valve cover pattern £340 each (2 available)
  • 3 Rear Valve cover pattern £210 each (all now sponsored)
  • 2 Cylinder liner casting £800 each (all now sponsored)
  • 2 Valve crosshead bracket castings
  • Rear Valve cover castings (all now sponsored)
  • Front Valve cover castings (all now sponsored)
  • 6 Valve liner castings £340 each (all now sponsored)
  • 3 Piston Casting + Rod + Rings £3702 each
  • 3 Piston Valve + Rod + Rings £4,368 each

    Lubrication
  • Copper pipe (per 3 metre length) £36
  • Left Hand Lubricator lid    £90 (now sponsored)
  • Left Hand Lubricator Body £210 (now sponsored)
  • Non Return Valves (6) £100 each (now sponsored)
  • Oil Boxes 11 @ £50 each - all sponsored
  • Oil Boxes 11 @ £95 each - all sponsored
  • Six Feed Atomiser + Valves & Adaptors £1450

    Tender
  • 2 Tender axlebox repair £950 (both now sponsored)

Vehicle

  • 12 ton Box Van (part sponsorship accepted) £1200 Now Sponsored


Small Intelligent Recycling Banner

Recycle your inkjet cartridges and mobile phones to help us raise much needed funds through Recycle4Charity.co.uk 

The LMS-Patriot Company Ltd. • The Hub, 17 Eastgate Street, Stafford, ST16 2LZ • Registered in England & Wales No. 6502248 • Registered Charity No. 1123521
All content copyright ©2017 The LMS-Patriot Company Ltd.
website by amber